|
How to Install SecureLogic Wall Safe Models
Important-
Read this first before installing:
-
Safe
must be in vertical position in order for door to drop open
-
Door
must be open in order to install
-
The
safe is designed to install between 16" studs
-
Safe
must be installed on a vertical wall
-
Recommended
installation height is approximately 5 feet from the floor
-
Once
installed, allow battery to charge for 24 hours
1. Locate
desired mounting location
2. The
insertable section of the safe is approximately 14" by 14."
Once mounting location is determined cut hole in wall accordingly.
3.
Carefully place safe in wall
4. Open
safe door according to instructions in owners manual
5. Locate
the 4 mounting tabs, 2 on each side of the safe walls.
6. Screw
bolts through mounting tabs and into wall studs
|
